The VENU360 provides all the processing and flexibility you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx’s proprietary AutoEQ™ and AFS™ algorithms, additional input channels, ethernet control via an Android,® iOS,® Mac,® or Windows® device, and updated wizards, the DriveRack VENU360 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.

The VENU360-B model provides all the features of the standard VENU360 model but with the addition of BLU link-enabled RJ-45 ports for interfacing with other BLU link-equipped devices, such as the dbx TR1616, the PMC16s, the BSS® Audio Soundweb London devices, or a Soundcraft® mixing console equipped with a BLU link option card. The VENU360-B model also provides a 7 x 6 routing/mixing matrix (using any available combination of AES, analog, and BLU link input channels) and a 3 x 6 signal processing chain.

dbx DriveRack VENU360-B Features:

• Input Processing:
• dbx Compression
• AFS™ (Advanced Feedback Suppression)
• 31-Band Graphic EQ
• 12-Band Parametric EQ (with narrow notch capabilities)
• Subharmonic Synthesis
• Backline Delay
• Noise Gate
• Output Processing:
• Crossover (supports full range up to mono 6-way systems)
• 12-Band AutoEQs (8 AutoEQ bands, 4 User bands)
• dbx Compression
• Automatic Gain Control
• Subharmonic Synthesis
• Noise Gate
• Tower Delays (up to 1000ms per output)
• 8-Band Parametric EQs (used for speaker tunings)
• dbx Limiting
• Driver Alignment Delays

dbx DriveRack VENU360-B Specifications:

• Input: (3) analog line inputs/(2) AES digital inputs(shared connectors), (1) RTA mic input
• Input Connectors: (3) female XLRs (2 selectable between analog/AES digital audio formats), (1) female XLR RTA mic input
• Input Type: Electronically balanced/RF filtered
• Input Impedance: > 30 k Ohms, balanced line to line
• Max Input Level (line inputs): > +28 dBu,balanced,
• CMRR: > 50 dB @ 1 kHz
• RTA Mic Preamp Phantom Power: + 48 VDC
• Output: (6) Line Outputs
• Output Connectors: Male XLR
• Output Type: Electronically balanced, RF filtered
• Output Impedance: 120 Ohms, balanced line to line
• Max Output Level: +22 dBu, balanced, < / = 1% THD
• BLU LINK Audio Connectors: (2) RJ-45 Ethernet connectors
• BLU LINK Audio Maximum Nodes: Up to 60 devices
• BLU LINK Audio Maximum Cable Length: 100m/328ft on Category 5e or higher cable between devices
• BLU LINK Audio Latency: 11/Fs [0.23 ms @ 48 k, 0.11ms @ 96k]
• BLU LINK Audio Pass Through Latency: 4/Fs [0.08 ms @48 k, 0.04 ms @ 96 k]
• Alignment Delay: Up to 1000 ms per output channel
• A/D Converter: 24-bit with dbx Type IV™ Conversion System
• A/D Dynamic Range: 117 dB A-weighted, 114 dB unweighted, 22 kHz BW
• Type IV Dynamic Range: 129 dB with transient material, A-weighted, 22 kHz BW; 126 dB with transient material, unweighted,22
• kHz BW; 121 dB typical with program material,A-weighted, 22 kHz BW
• D/A Converter: 24-bit
• D/A Dynamic Range: 116 dB A-weighted, 113 dB unweighted, 22 kHz BW
• Internal Processing Wordlength: 32-bit floating point
• Supported Sample Rates: 48 / 96 kHz (32 - 192 kHz using sample rate conversion)
• System Performance Dynamic Range: 114 dB A-weighted;110 dB unweighted
• THD+Noise: 0.0025% typical at + 4 dBu, 1 kHz, 0 dB input gain
• Frequency Response: 20 Hz – 20 kHz, +0 /- 0.5 dB
• Interchannel Crosstalk: < -97 dB, -105 dB typical20-20 kHz, +4 dBu, all channels measured
• Latency: Analog input to output: 2.57 ms (48 kHz),2.28 ms (96 kHz); Digital AES input to output: 2.31 (48 kHz), 2.15 ms (96 kHz)
• Operating Voltage: 100-240 VAC 50/60 Hz
• Power Consumption: 18 W
• Unit Weight: 5.48 lbs. (2.49 kg)
• Shipping Weight: 7.10 lbs. (3.22 kg)
• Dimensions (H x D x W): 1.75 x 8.0 x 19” (4.4 x 20.32 x 48.26 cm)